🏅 How To Reset Bmw Service Light

While seated, located the S/R button on the left. Hold the S/R button as you insert and turn your key without starting the car. Hold the button until the message “RESET” appears. Release the button briefly, then press and hold the S/R button until the “RESET” begins to flash. Press and release the S/R button once more. You can then turn on the car and put the heat on full blast. Make sure you leave the coolant reservoir cap open to purge the system. After a few minutes you will see coolant start the cycle thought the coolant reservoir. Let the car run for a bit so you can get all the air out of the system. Good luck. EDIT: there's probably instructions on the TIS website, too ( www.newtis.info ). Just click the preceding link, type in the last 7 digits of your VIN, then type reset service light in the search box. EDIT 2: here's a direct link from just doing the above using a generic 740e as an example. If you do maintenance on your BMW (S1000RR in my case), this is the least expensive way I have found to reset the Service warning light. On some models, the Don't forget to reset your oil service warning after you change the oil. Best part is thst it foesn't require a special tool. Liqui Moly Molygen: .

how to reset bmw service light