🎑 Mondeo Mk4 Dash Lights Not Working

Today randomly had the rev counter and speedo not work at all during a drive. Everything else was fine on the dash, engine ran fine. Was fine after a power cycle. Hooked it up to a scanner no extra DTCs or codes. Then later that evening battery low message came on. Checked voltage was low. battery only at 25%. Makes sense as have been doing #1 · Nov 7, 2018 Hi everyone, not sure if anyone has experienced this is issue but any info would be greatly appreciated, my mondeo mk 4 titanium x sport's dash has stoped working my speedo, rev counter, fuel gauge and engine temp has stopped but everything else works as it should including cruise control etc, there is no faults coming up either. Pin 38 => POSITION LIGHT FRONT LEFT (dimmed) Pin 57 => DAYTIME RUNNING RH (full bright) Pin 41 => POSITION LIGHT FRONT RIGHT (dimmed) This should clearify if they are set correctly by the BCM. You could also unplug it and put 12V to those pins to see if the connection is ok. All signals for the DRLs are routed through a connector (C11-G/H) on Windows and mirrors AUTO-DIMMING MIRROR E71028 The auto-dimming mirror will adjust automatically when hit by glaring light from behind. It will not work when you have selected reverse gear. Page 73: Instruments Instruments GAUGES Type 1 and 2 E72984 Tachometer Engine coolant temperature gauge Fuel gauge Speedometer Parking sensors not working: When I got the car, the parking sensor button would flash twice and not function, this turned out to not need electrical equipment replacing as with the above issues but simply water ingress into the sensors which was fixed by spraying WD-40 into the sensors to displace the trapped water. Hi everyone this is my 1st post as I bought a 58 plate ford mondeo 2.0 petrol (lpg converted) yesterday as a 2nd car for my long commute to work, and I've notice 2 problems with it already, 1 is that the cruise control doesn't work, pressing the button does nothing what so ever, and 2nd is that I .

mondeo mk4 dash lights not working